+86-373-3020116
Automatic Electric Flat Carriage
video
Automatic Electric Flat Carriage

Automatic Electric Flat Carriage

The guiding principle of the automatic electric flat carriage is to program according to the trajectory of the automatic guided car. The voltage signal detected by the digital encoder determines its position deviation from the pre-programmed track. The controller adjusts the motor speed according to the position deviation to perform the deviation correction so that the automatic guided car walks along the pre-programmed trajectory. Therefore, when the AGV automatically guides the trolley, it needs to continuously adjust the motor speed according to the input position deviation signal to control the system in real time.
Send Inquiry
Product Details ofAutomatic Electric Flat Carriage

Automatic Electric Flat Carriage

 

The navigation principle of the automated electric flat car relies on pre-programmed trajectory for AGV travel. Digital encoders output voltage signals to calculate the positional deviation between the actual driving path and the preset route. The main controller adjusts the rotational speed of drive motors according to the deviation value to implement path correction, so that the AGV runs strictly along the programmed trajectory. In actual operation, the AGV trolley performs real-time closed-loop control by continuously adjusting motor speed based on real-time position deviation feedback signals.

This automated flatbed trolley features an independent two-wheel drive differential steering system with a four-wheel layout, wherein the front two wheels function as swivel caster followers. Stepper motors output torque to drive wheels through reduction gearboxes, and steering is completed by adjusting the rotational speed difference between the left and right drive wheels.

1. Automatic electric flat car body

The AGV base unit is composed of chassis, main frame, outer cover, control cabin, as well as supporting electromechanical components including gear reducers, drive motors and traveling wheels. As the foundational carrier of the AGV, it inherits the structural features of electric vehicles while satisfying special design requirements for unmanned autonomous operation. The main frame is fabricated via integral welding of steel profiles. A lower overall center of gravity greatly improves the anti-overturning stability under heavy load. The vehicle platform is equipped with material transfer mechanisms, whole-vehicle electronic control system, physical operation buttons and human-machine display terminals.

2. Frame

The frame is the body part of the whole AGV car, which is mainly used to install wheels, light sensors, servo motors and reducers. Servo motor driver, PCD board and battery are installed on the frame. For the design of the frame, there must be sufficient strength and hardness requirements, so the frame material is made of cast aluminum alloy, which is relatively light in quality and good in weldability.

3. Wheel

The vehicle is equipped with solid rubber tires. Two fixed drive wheels are arranged at the rear of the chassis and directly coupled with hub motors for power output. The front two wheels are swivel caster follower wheels, which undertake load bearing and chassis balancing for the whole trolley.

4. Load transmission device

AGV's load transfer device is a flat plate, which is used to transport box parts to the designated station. It is mainly used to load box parts and transport materials.

5. Power system

Batteries serve as the exclusive onboard power source for AGVs at present. They supply power for vehicle traveling drive and all onboard auxiliary equipment, including control modules, communication units, safety protection devices and other assemblies. Customized functional expansion can be realized according to clients' personalized requirements.

The peripheral supporting facilities of the AGV system adopt conventional industrial AC power supply, with differentiated power configuration requirements determined by actual application scenarios. Such facilities include frequency converters for charging stations, automatic access doors, server room equipment, communication hardware and environment-adaptive operating devices. We configure matched energy storage battery packs for AGVs in accordance with vehicle model, working cycle and rated load capacity, and the power supply generally adopts integrated battery pack assembly.

0

1

2

3

4

5

6

7

 

Hot Tags: automatic electric flat carriage, China, manufacturers, suppliers, factory, customized, made in China, Automatic Electric Flat Car, Automatic Guided Carts, Automated Transfer Vehicle, Heavy Load AGV, Agv Automated Guided Vehicle, Heavy Duty Agv Transfer Cart

Send Inquiry

(0/10)

clearall