Railway-type Transfer Trolley Transport Cathode

Products Description

The BTL series of tractors rely on towing cables for power transmission. The power supply is connected to the electrical control box via cables, thereby controlling the motor to start, stop, move forward and backward. The cables are laid between two tracks and the working voltage is 36V. The hydraulic lifting system can be installed on the vehicle to meet the lifting needs of the vehicle, and it can also be installed with PLC on the vehicle to achieve fully automated operation. It can also be used in high-temperature and explosion-proof environments, etc. This series of vehicles is suitable for situations where the driving distance is less than 20 meters, the usage frequency is high, and the height requirements for the vehicle are low. Its structure is simple and the cost is low. Compared with the BXC series of vehicles, it is more popular in transportation as the operation time is not restricted; compared with the BDG series of vehicles, there is no need for insulation treatment of the track installation; compared with the BJT series of vehicles, the cost is lower.

Products Parameters

Model		BXC-2T	BXC-10T	BXC-20T	BXC-30T	BXC-50T	BXC-63T	BXC-150T
Rated load (T)		2	10	20	30	50	63	150
Table Size	Length (liter)	2000	3600	4000	4500	5500	5600	10000
	Width (width)	1500	2000	2200	2200	2500	2500	3000
	Height (high)	450	500	550	600	650	700	1200
Wheel base (mm)		1200	2600	2800	3200	4200	4300	7000
Wheel diameter (mm)		Φ270	Φ300	Φ350	Φ400	Φ500	Φ600	Φ600
Ground clearance (mm)		50	50	50	50	50	75	75
Motor power (kW)		1	1.6	2.2	3.5	5	6.3	15
Battery capacity (Ah)		180	160	180	250	330	400	600
Battery voltage (V)		24	48	48	48	48	48	72
Operating time at full load		4.32	4.8	4	3.5	3.3	3	2.9
Running distance for one charge (km)		6.5	7.2	4.8	4.2	4	3.6	3.2
Maximum wheel load (KN)		14.4	42.6	77.7	110.4	174	221.4	265.2