Flaw Detection Trolley

product introduction

flaw detection trolley is mainly used for track maintenance and daily maintenance. Since the body of the track maintenance vehicle is very light and weighs about 100kg, two adults can easily lift it. The car is mainly powered by a lithium battery, which can meet the working time of 4 hours with a single charge. The speed is about 10km per hour. The car is controlled by a remote control. The speed can be adjusted according to the situation. In case of emergency, the foot brake can be applied.

The body of the flaw detection trolley will reserve various holes according to the customer's requirements to facilitate the installation of various devices. The car's own load capacity can bear about 0.5 tons, up to 1 ton, or according to customer needs, tow a non-powered flat car behind the car, put various tools and equipment on the back flat car, and use the car Take it from above, very convenient and concise. The size and load of the unpowered flatbed truck are adjusted according to customer requirements.

The track maintenance vehicle can be disassembled. When the car does not need to work, the car battery can be disassembled and charged for the next use.

Part show & Detail Images

Rail Inspection car

00340201902251803452

The advantages

Our rail trolleys prioritize operator safety and operational reliability through optimized electrical layout, strict safety protections, and user-friendly control modes. Key details are as follows:

1. Safe Placement & Labeling of Electrical/Control Components

The electrical cabinet and operation system are installed in secure locations on both sides of the rail trolley. This placement avoids damage from external impacts and ensures easy access for maintenance.

All wiring inside the control cabinet is labeled with unique numbers. This simplifies circuit identification, speeds up troubleshooting, and reduces maintenance time.

2. Electrical Safety Compliance & Protections

In line with safety standards, the rail trolley uses low safety voltage for its electrical system. This minimizes the risk of electric shock, even in humid or dusty industrial environments.

A residual-current circuit breaker (RCCB) is equipped to cut off power immediately in case of electrical leakage, providing critical protection against electrical hazards.

Front and rear sound-and-light alarms are installed. These activate during trolley movement to alert nearby personnel and obstacles, effectively preventing collisions.

3. Operation Modes & Multi-Layer Protections

On-Site Operation Flexibility: The rail trolley can be operated while walking alongside it, allowing operators to closely monitor cargo and adjust movement in real time.

Pedal Control Design: It adopts a pedal control mode for core functions (e.g., start/stop). This frees up operators' hands to focus on cargo stability and the surrounding environment, enhancing safety.

Comprehensive Circuit Protection: Three key protections safeguard the electrical system: overvoltage protection (prevents damage from high voltage), undervoltage protection (avoids unstable operation from low voltage), and overcurrent protection (stops circuit overloads).

Rail Inspection car