Railway Transfer Platform Cart has the characteristics of simple structure, large carrying capacity, less pollution, easy to use, easy to maintain and so on. It is used in machine manufacturing and metallurgy. Different from electric flat car, rail flat car does not need cable, so it does not hinder cross transportation, but it has high requirements for track.
1. The number of step-down transformers should not exceed 3. When the distance is longer, the transformer is connected to the same phase point of power supply to implement multi-point power supply. 2. In order to avoid collision, the rail joint should be chamfered with 5mm × 45 degrees on the rail joint. The rail shall be welded well and the joint shall be ground flat after welding. 3. KPD series electric flat transfer car -- 36V low voltage rail power supply. Metal parts must not touch the track, which is to ensure the insulation of the track. 4. The voltage should not exceed 42V. On the track of 36V, the terminal of the line should be started at the voltage of no less than 30V, otherwise it needs to add compensation line. 5. The insulation resistance of the track shall not be less than 10 ohm. The bottom of the rail shall be coated with asphalt, and 5mm insulating rubber plate shall be padded. Both sides of the rail shall be filled with asphalt sand.
Track is necessary for Railway Transfer Platform Cart. Of course, the quality of track is also related to the effect of equipment work.