Ladle electric flat cars are important handling equipment used by steel plants to transport high temperature ladle. Although they also belong to the ranks of electric flat cars, there are still many differences from ordinary electric flat cars. In general, the main points are as follows Big difference:
(1) The self-weight of ladle electric flat cars is usually much larger than that of ordinary flat cars. The thicker steel plate used can ensure that the frame is not deformed during use and is more stable.
(2) Compared with ordinary flat cars, ladle cars start slower and stop more slowly.
(3) Another big difference is that the ladle electric flat car has 2 sets of drives. When one motor is damaged, the other motor can continue to drive the flat car to use, avoiding halfway use.
(4) Ladle electric flat cars need to be designed with a special insulation layer. Because high-temperature objects are being transported, the motors, electrical appliances and other components of the flat cars need to be resistant to high temperatures, while ordinary electric flat cars generally do not have this requirement. For ladle car motors, reducers and other electrical appliances, our company uses first-class brand accessories. The quality is guaranteed and this series of cars has a long service life. The operation is simple and no danger. The staff can operate alone after simple training, and no dangerous things will happen during the operation.
Let me give you a brief introduction to the insulation materials of ladle cars. In order to reduce the heat loss of molten steel and avoid the phenomenon of cold steel, it is necessary to reduce the heat loss from the wall of the package. To reduce the thermal conductivity of the cladding wall, a thermal insulation layer is usually laid between the permanent lining of the ladle and the steel shell. The insulation layer should not be too thick, otherwise it will affect the thickness of the working layer and the amount of molten steel loaded. Our factory designers have found in many experiments that a layer of asbestos board with a thickness of 10mm between the permanent lining and the steel shell can meet the thermal insulation requirements. So far, our customers have spread all over the world. The series of cars produced by our factory are very popular among customers. To believe in Perfect is to believe in your choice. The Perfect factory never disappoints customers in terms of product quality and price. Perfect is with you.