10 ton busbar transfer car
10 ton busbar transfer car is a rail handling equipment that can supply power continuously. The power supply mode of the car is power supply by sliding contact wire. The current is sent to the vehicle body through the sliding wire block, the power supply is integrated through the rectifier bridge, and the current is sent to the motor through the controller.
The sliding contact wire is an advanced mobile power supply device in China. The groove of the sliding contact wire is oxygen-free copper. The power supply is connected to the rated voltage (380V) from a section of the sliding contact wire. The groove of the oxygen-free copper wire plate can guarantee the power supply. The voltage will not be reduced (the use of oxygen-free copper plates will not oxidize due to long-term exposure), and the appearance uses insulation devices to ensure the safety of factory personnel. The equipment for the sliding contact line is a sliding contact block, and the T-type slider uses a sliding contact line The groove enters for a period of time, and the concave groove of the wire groove ensures the sliding of the slider. The sliding friction between the slider and the wire groove ensures uninterrupted power supply. (tip: Please pay attention to replace the sliding wire slider when the time is too long.) The development of 10 ton busbar transfer car is a new type designed and developed by professionals, so it is very popular with customers.