Hot metal ladle transfer car

running on rail, simply speaking, it is an electric cart running on the rails. due to its power supply, it can get rid of the limitation of cable, and has no strict requirement for the rails.

The kinds of hot metal ladle transfer cart running on rail can be operated via remote control, which makes it more convenient and safer. What's more, due to this power method, it can run without limited distance as long as charged fully!

The hot metal ladle transfer car use can be used in all kinds of environment with no limited running distance.

Its application range includes: mold field, car field, steel, iron, heavy industry, light industry, chemical, mine, ship, project, spaceflight, coal, spray booth, nuclear energy, hydraulic engineering, etc.

For material transport: boiler, coil items, pump, transformer, shaft, drum, steel ladle, steel structure, steel pipe, mold, beam, container, heavy equipment, Aluminum product, compressor, polycrystalline silicon, motor, coil, scrap, pallet...

Scope of transportation of goods

boiler/ coil items

mold field/ car field

steel/ iron

heavy industry/light industry

chemical/mine/ship

project/spaceflight/coal

spray booth

hydraulic engineering, etc

All can be customized as per customers' requirement. And our business is to meet your business needs, hope our professional team can help you well with rich experience.

The series' ladle transfer cart whose battery is installed in the carts. The batteries supplied the electricity to the DC motor through the electrical control system. By this ways, we can make the ladle transfer cart running on rails to start, stop, go forward, back ward, adjust the speed and so on.

Of course, the power supply is chosen as per your working environment, the proper solution will be recommended to you after knowing your plant. hope rich experience can help you well.

Explosion proof battery:

Explosion proof enclosure, explosion-proof circuit design (such as overcurrent protection, short circuit protection) and special electrolyte (such as gel electrolyte) can be used in hazardous environments with combustible gas and dust (such as chemical workshop, oil and gas warehouse) to avoid battery short circuit or explosion caused by high temperature.
Ordinary type battery:

No special explosion-proof structure, only meets conventional safety standards, suitable for dry, well ventilated non hazardous environments (such as ordinary warehouses and workshops), with relatively low cost.

Application scenarios

Steel ladle cars are the "arteries" of metallurgical production, mainly used for:

Steelmaking workshop

Transfer the molten steel ladle from the converter to the continuous casting machine or from the refining furnace to the pouring station;

Continuous casting workshop

Transfer the continuously cast steel billets to the rolling workshop or temporarily store them in the billet warehouse;

Rolling workshop

Transfer the steel billets from the heating furnace to the rolling mill, or transport the finished steel products to the stacking area;

Blast furnace area

Transfer molten iron from the blast furnace to the pre-treatment station or converter.

Comprehensive inspection and preparation before transportation

Material and load inspection

Strictly prohibit overloading: According to the rated load of the steel ladle (such as the 100 ton class vehicle, it is prohibited to exceed 110 tons), the weight of the material is confirmed through weighing sensors or scales, and the eccentric load must be controlled within the allowable range (eccentricity ≤ 1/10 of the wheelbase).
High temperature material protection: If transporting molten steel/hot steel billets, check whether the insulation layer (such as fire-resistant bricks, ceramic fiber boards) is intact, without cracks or detachment; There is no accumulation of steel slag at the bottom of the ladle to avoid falling and scalding the equipment.

Confirmation of Environment and Route

Cleaning the track/driving path: Remove debris (such as steel slag, tools) from the track, check if the limit devices (such as travel switches) on the route are sensitive, and if the radius at the bend meets the vehicle's turning requirements (to avoid wheel gnawing on the track).
Environmental adaptation: It is necessary to confirm the effectiveness of equipment insulation measures in high-temperature areas (such as near steel furnaces); Workshops with high levels of dust should clean the surfaces of motors and sensors in advance to prevent poor heat dissipation or signal interference.

load-bearing : BXC - 30 T rail flat car.(t can bear a load of 30 tons, which is suitable for transporting relatively heavy industrial materials and equipment in the factory)
Industrial Transportation: Mainly used in industrial production workshops, especially in metallurgical, steel - making and other industries. As shown in the figure, it can be used to transport large - sized and heavy ladles, realizing the transfer of molten steel and other materials in the production process.
Rail - guided: It runs along the rails, which ensures the stability and accuracy of transportation. The rails can guide the flat car to move along a fixed route, reducing the deviation during transportation.
Sturdy Platform: The flat - car platform is designed to be sturdy and can stably place the transported objects. The structure of the platform is able to withstand the weight and impact of heavy loads.
Stable Operation: The rail - guided design and the stable structure of the flat car ensure that it can run stably during transportation, reducing the risk of goods falling and equipment tipping.

Our Advantages

Load capacity,table size and rail gauge can be customized on request.
Power supply mode: Battery powered,cable powered,low voltage rail powered,busbar powered.
3.Options: Warning light,radar detector,remote controller, electrical parts.
Run on rail or floor.
1 years warranty.
After-sale service provided ,engineer available overseas.