Trackless Mold Transfer Cart
Trackless Mold Transfer Cart
The BWP trackless transfer cart is powered by a battery installed inside the car body. The electric control system instructs the electric flat car driven by a DC motor to start, stop, forward, reverse, turn left and right, and adjust the speed through the remote control. This transfer cart does not need to install guide rails on the ground, and can be directly operated on flat and hard roads/grounds and concrete floors.
Technical parameters of trackless transfer cart
Model | BWP-2T | BWP-10T | BWP-20T | BWP-30T | BWP-50T | BWP-63T | BWP-150T | |
Rated load (T) | 2 | 10 | 20 | 30 | 50 | 63 | 150 | |
Table size | length(L) | 2000 | 3600 | 4000 | 4500 | 5500 | 5600 | 10000 |
Width(W) | 1500 | 2000 | 2200 | 2200 | 2500 | 2500 | 3000 | |
Height(H) | 450 | 500 | 550 | 600 | 650 | 700 | 1200 | |
Wheel Base (mm) | 1200 | 2600 | 2800 | 3200 | 4200 | 4300 | 7000 | |
Wheel Diameter(mm) | Φ270 | Φ300 | Φ350 | Φ400 | Φ500 | Φ600 | Φ600 | |
Ground Clearance (mm) | 50 | 50 | 50 | 50 | 50 | 75 | 75 | |
Motor Power (Kw) | 1 | 1.6 | 2.2 | 3.5 | 5 | 6.3 | 15 | |
Battery Capacity(Ah) | 180 | 160 | 180 | 250 | 330 | 400 | 600 | |
Battery Voltage(V) | 24 | 48 | 48 | 48 | 48 | 48 | 72 | |
Running Time When Full Load | 4.32 | 4.8 | 4 | 3.5 | 3.3 | 3 | 2.9 | |
Running Distance for one Charge(Km) | 6.5 | 7.2 | 4.8 | 4.2 | 4 | 3.6 | 3.2 | |
Max Wheel Load (KN) | ||||||||
Certificates
Video
Hot Tags: trackless mold transfer cart, China, manufacturers, suppliers, factory, customized, made in China, Die Transport Cart, Material Transfer Wagon, Electric Mold Transfer Cart, multidirectional transfer cart, Mold Transport Cart, Mold And Die Handling Equipment
Send Inquiry
