Precautions for sliding rail electric flatbed truck
Sliding rail electric flatbed trucks are cost-effective and safe, and avoid the possibility of accidents caused by the use of steel cables. Therefore, they are used more frequently in life, so what should be paid attention to during use? Electric flat car manufacturers come to talk about this problem
1. The battery is detachable and convenient to maintain the battery. You only need to unplug the electric vehicle when charging, so that the pulse repair of various repair chargers on the battery can be effectively input to the battery, and the repair pulse will not be absorbed by the electric vehicle controller
2. If it occurs during the maintenance process: difficult disassembly, partial deformation of the car body, damage to the pallet plane, excessive lifting and dismounting difficulty, small disassembly space for the fixing bolts below, too many, and some jams are more serious.
3. During the use of the vehicle, pay attention that the materials must not be stacked too high, the materials are stacked firmly, not loose, and running without load. The equipment staff should concentrate on operating the vehicle, pay attention to the situation before the direction of travel, and observe the operation of other equipment around , To ensure that it does not collide with other equipment during operation. During operation, equipment operators must not do things that have nothing to do with work. There is a connecting hook at the front and rear of the electric flat car, which can tow other flat cars or be towed if necessary
4. The laying of the track is to lay the insulation layer to avoid the leakage of the track sliding contact line. Cover the temporary surface of the insulation layer with a layer of asphalt as a buffer layer, and then install the track. When installing the track, you should pay attention to the use of spot welding technology. On the one hand, it is necessary to strengthen the connection point of the track, and on the other hand, it is necessary to extend the service life of the track.
5. The reinforcement of the components must be accurate, the reinforcement surface must be flat and smooth, and the ratio of the sulfur cement mortar must meet the requirements
6. In the track foundation construction, attention should be paid to the accuracy of the vertical position of the embedded part hole, and keep the hole clean and free of impurities