When using a heavy flat trailer, you may encounter a situation where it can't start a fire. What are the reasons for that?
1. The starter relay is faulty. Replace the starter relay. This kind of situation appears more often in the old flat car, and the contact of the relay is not good after a long time of use.
2. If the electrical circuit connector falls off, the direct wiring is firm, or the fuse beside the battery is not in good contact, pull it out and install it again.
3. The battery voltage is too low, so that the engine of heavy flat trailer can not reach the minimum starting speed. In this case, only recharge the battery; or replace the battery.
4. The starter is damaged. The starter gear of flatbed truck cannot be embedded in the flywheel ring gear. Check, repair or replace the starter. How to deal with the problem that the truck can't catch fire when going out.
5. If the sensor is damaged, check the corresponding fault code and replace the corresponding sensor. If the phenomenon that the fire can only be caused by multiple taxis, it is necessary to consider whether the sensor is damaged.
6. If the heavy flat trailer does not take a taxi in neutral, it will definitely not be able to start. It is necessary to shift the gear to neutral; or the neutral switch is damaged and the clutch is pressed to start the fire.
7. When the temperature is low in winter, the flat-panel engine has the function of preheating, and it can not catch fire until the preheating is completed.
our company
If you have any questions or concerns about the product, please feel free to contact our staff at any time：
📧Email：info@perfte.com
🌐https://www.chinatransfercar.com/
📞 Wechat /WhatsApp/ Tel: +86 15090325221