+86-373-3020116

Trackless carrier/automatic guided vehicle

Aug 23, 2024

Why Choose Trackless Automatic Guided Vehicles? Key Advantages for Flexible Manufacturing

 

 

1, Four core navigation systems (concise features)


Improved line navigation: Mark the route along the ground embedded wire, guided by a magnetic field generated by a magnet (not a wire), without the need for wire power supply, to avoid power loss;
Optical navigation: Drive along the marked line and use the radar installed on the AGV to identify the route, which is easier to install and modify than pre embedded wires;
Artificial visual navigation: With the help of artificial visual recognition mirrors, the deviation between the route and AGV is calculated in real time and corrected to ensure accurate driving;
Laser reflection positioning navigation: By rotating the laser scanning the reflective plate inside the factory and combining it with the pre stored factory map to determine the location, it is the most convenient way to modify the route.

 

2, Working principle of AGV (simplified process)


Path planning: pre-set routes through scheduling systems (such as "Warehouse A → Production Line B → Waste Area C"), or AGV autonomously scans the environment to generate dynamic paths; ​
Positioning and navigation: The navigation system captures real-time location information (such as laser radar matching environmental features, QR code recognition coordinates) to ensure that the AGV travels along the path with an error of ≤ 10mm
Task execution: After receiving scheduling instructions, automatically go to the pickup point, confirm the material location through sensors, and complete the grabbing/loading process; ​
Safe operation: The obstacle avoidance sensor continuously monitors the surrounding area during driving. In case of emergencies (such as personnel intrusion), deceleration/shutdown will be triggered within 0.5 seconds; ​
Task feedback: Upon arrival at the destination, the material is automatically unloaded and a "task completed" signal is sent to the scheduling system, waiting for the next instruction.

 

3, The core advantages of AGV (compared to traditional equipment)


High degree of flexibility: no need to lay tracks (different from track electric transfer vehicles), the path can be quickly modified through software, suitable for dynamic logistics scenarios with multiple nodes and batches (such as "multi shelf sorting area" transfer in e-commerce warehouses); ​
Reduce labor costs: No need for licensed drivers (different from industrial forklifts), one scheduling system can manage 20-50 AGVs, reducing manual handling needs by more than 80%, especially suitable for workshops with 24-hour continuous operation; ​
Strong accuracy and safety: The positioning accuracy reaches ± 5-10mm, avoiding errors caused by manual handling (such as PCB board transportation in electronic factories); Multiple safety protection designs result in a much lower accident rate compared to manual driving equipment; ​
Suitable for small batches and multiple categories: The load range covers 50kg-5 tons (mainly for light/medium loads, different from the "heavy super heavy" positioning of rail cars), and can quickly switch material types (such as switching from "handling parts boxes" to "transporting small equipment").

info-800-800

info-800-800

info-800-800

info-800-800

My wechat /WhatsApp/ Tel: +86 15090325221

My email address is info@perfte. com

 

Send Inquiry