Die change scheme of rubber tyred electric flat car
1、Introduction to rubber tyred electric flat car:
The utility model is also called an electric wheeled transport vehicle, which can be operated by hand, and is also called an electric wheeled transport vehicle. The power supply mode is battery power supply, and the service life of the battery is about 2.5 years. High strength polyurethane rubber solid tires can be selected for the driving wheel and bearing wheel, which can get rid of the dependence of the track flat car on the ground rail, do not damage the infrastructure, walk freely on the ground, turn freely, not limited by space and ground, and change the walking direction and route at any time. It is very suitable for use on the site where the running route is not fixed.
Two, the main points of mold transportation equipment:
Photos of stamping workshop
1. High requirements for safety performance: most of the molds are heavy workpieces, so the safety of personnel and articles must be ensured during transportation, and there shall be no safety accidents such as bumping and dumping.
2. Strong load capacity: the weight of the mold is large, and some weigh hundreds of tons.
3. Flexible, light and heavy molds will also have a large volume and have high requirements for space when moving.
4. Low table: the height of the pressure die machine is limited, and the height of the die transport tool cannot be too high.
5. Easy to operate: a die press does not only press one die, but can replace multiple dies.
6. Unrestricted operation: the mold occupies more space in the workshop, so the transportation equipment should be able to transfer the mold anytime and anywhere.
7. Protect the workshop floor: because the mold is generally heavy and the pressure on each wheel is heavy, the material of the wheel should be firm and can not damage the floor.
