How to maintain trackless turning flat car when the weather gets hot
1. Trackless turning flat car tour to check the content. Traveling mechanism: The motor, coupling, and reducer are not loose and work normally. The reducer (reduction gear) has enough oil, the oil quality meets the requirements, and there is no dust and debris. The brakes are flexible and easy to use, and the brake wheels are accurate to touch without severe wear. The wheels are accurate to touch and outstandingly rolling. Trackless turning flat carriage body: The car body is not deformed, and the platform is flat without pitting. Electrical: The sliding wire is in good contact with the slider, moving flexibly, and the wire frame is sturdy and intact (or the battery has sufficient power). Electrical switches are flexible and easy to use. The alarm sounded loudly. All electrical appliances have good insulation. others: complete maintenance information and cleaning. Equipment parts are intact.
2. For the battery-powered level car, when the power is insufficient, the battery should be drawn out in time to charge as requested, and replaced with a backup battery for operation. The replacement and charging of the battery should be performed by a special person. Before leaving work, you must ensure that there is no cargo on the flat car and clean it in accordance with the guidelines to keep the table surface clean.
3. It is forbidden to use equipment exceeding standard and overload. It is necessary to handle the heavy objects smoothly and lightly to ensure that the components are evenly distributed and no emphasis is placed on them.
4. Frequently check the working status of each part. If you find that the temperature of the motor or bearing has increased or abnormal noises, you should park your car immediately. Do not drive level cars to top, bump, tow, or pull vehicles on the railway. The direction of travel and retreat is obvious, which is consistent with the switch's reverse and smoothness. It is forbidden for the operator to leave or entrust the operating equipment.
5. Before starting the device, it is necessary to announce the signal first, check the direction of movement without people and obstacles before starting, stop and stop smoothly to avoid touching the end stop. When the start switch can not walk, it should be checked immediately to avoid burning the motor or causing other incidents. When changing the direction of movement, it is necessary to wait for the movement to stop completely before starting the movement in the opposite direction. These are just a few points on how to maintain electric flat cars in hot weather. hope it is of help to you. If in doubt, welcome to consult.